The

(or

utility is used for just about anything under the sun involving TCP, UDP, or

sockets. It can open TCP connections, send UDP packets, listen on arbitrary TCP and UDP ports, do port scanning, and deal with both IPv4 and IPv6. Unlike

scripts nicely, and separates error messages onto standard error instead of sending them to standard output, as

does with some.

Common uses include:

simple TCP proxies

shell-script based HTTP clients and servers

network daemon testing

a SOCKS or HTTP ProxyCommand for

and much, much more

The options are as follows:

Use IPv4 addresses only.

Use IPv6 addresses only.

Allow broadcast.

Send CRLF as line-ending. Each line feed (LF) character from the input data is translated into CR+LF before being written to the socket. Line feed characters that are already preceded with a carriage return (CR) are not translated. Received data is not affected.

Enable debugging on the socket.

Do not attempt to read from stdin.

Pass the first connected socket using

to stdout and exit. This is useful in conjunction with

to have

perform connection setup with a proxy but then leave the rest of the connection to another program (e.g.

using the

option). Cannot be used with

Print out the

help text and exit.

Specify the size of the TCP receive buffer.

Sleep for

seconds between lines of text sent and received. Also causes a delay time between connections to multiple ports.

When a connection is completed, listen for another one. Requires

When used together with the

option, the server socket is not connected and it can receive UDP datagrams from multiple hosts.

Listen for an incoming connection rather than initiating a connection to a remote host. The

and

to listen on can be specified either as non-optional arguments, or with options

and

respectively. Cannot be used together with

or

Additionally, any timeouts specified with the

option are ignored.

Set the TTL / hop limit of outgoing packets.

Ask the kernel to drop incoming packets whose TTL / hop limit is under

the network socket after EOF on the input. Some servers require this to finish their work.

Do not perform domain name resolution. If a name cannot be resolved without DNS, an error will be reported.

Specify the size of the TCP send buffer.

Specifies a username to present to a proxy server that requires authentication. If no username is specified then authentication will not be attempted. Proxy authentication is only supported for HTTP CONNECT proxies at present.

Specify the source port

should use, subject to privilege restrictions and availability.

after EOF on stdin, wait the specified number of

and then quit. If

is negative, wait forever (default). Specifying a non-negative

implies

Choose source and/or destination ports randomly instead of sequentially within a range or in the order that the system assigns them.

Enable the RFC 2385 TCP MD5 signature option.

Set the source address to send packets from, which is useful on machines with multiple interfaces. For

datagram sockets, specifies the local temporary socket file to create and use so that datagrams can be received. Cannot be used together with

Change the IPv4 TOS/IPv6 traffic class value.

may be one of

or one of the DiffServ Code Points:

or a number in either hex or decimal.

Send RFC 854 DON'T and WON'T responses to RFC 854 DO and WILL requests. This makes it possible to use

to script telnet sessions.

Use

sockets. Cannot be used together with

or

Use UDP instead of TCP. Cannot be used together with

For

sockets, use a datagram socket instead of a stream socket. If a

socket is used, a temporary receiving socket is created in

unless the

flag is given.

Set the routing table to be used.

Produce more verbose output.

Terminate after receiving

packets from the network.

Connections which cannot be established or are idle timeout after

seconds. The

flag has no effect on the

option, i.e.

will listen forever for a connection, with or without the

flag. The default is no timeout.

Use

when talking to the proxy server. Supported protocols are

(SOCKS v.4),

(SOCKS v.5) and

(HTTPS proxy). If the protocol is not specified, SOCKS version 5 is used.

Connect to

using a proxy at

and

If

is not specified, the well-known port for the proxy protocol is used (1080 for SOCKS, 3128 for HTTPS). An IPv6 address can be specified unambiguously by enclosing

in square brackets. A proxy cannot be used with any of the options

DCCP mode.

Only scan for listening daemons, without sending any data to them. Cannot be used together with

can be a numerical IP address or a symbolic hostname (unless the

option is given). In general, a destination must be specified, unless the

option is given (in which case the local host is used). For

sockets, a destination is required and is the socket path to connect to (or listen on if the

option is given).

can be specified as a numeric port number or as a service name. Port ranges may be specified as numeric port numbers of the form

In general, a destination port must be specified, unless the

option is given.

It is quite simple to build a very basic client/server model using

On one console, start

listening on a specific port for a connection. For example:

is now listening on port 1234 for a connection. On a second console

connect to the machine and port being listened on:

There should now be a connection between the ports. Anything typed at the second console will be concatenated to the first, and vice-versa. After the connection has been set up,

does not really care which side is being used as a

and which side is being used as a

The connection may be terminated using an

There is no

or

option in this netcat, but you still can execute a command after connection being established by redirecting file descriptors. Be cautious here because opening a port and let anyone connected execute arbitrary command on your site is DANGEROUS. If you really need to do this, here is an example:

On

side:

On

side:

By doing this, you create a fifo at /tmp/f and make nc listen at port 1234 of address 127.0.0.1 on

side, when a

establishes a connection successfully to that port, /bin/sh gets executed on

side and the shell prompt is given to

side.

When connection is terminated,

quits as well. Use

if you want it keep listening, but if the command quits this option won't restart it or keep

running. Also don't forget to remove the file descriptor once you don't need it anymore:

The example in the previous section can be expanded to build a basic data transfer model. Any information input into one end of the connection will be output to the other end, and input and output can be easily captured in order to emulate file transfer.

Start by using

to listen on a specific port, with output captured into a file:

Using a second machine, connect to the listening

process, feeding it the file which is to be transferred:

After the file has been transferred, the connection will close automatically.

It is sometimes useful to talk to servers

rather than through a user interface. It can aid in troubleshooting, when it might be necessary to verify what data a server is sending in response to commands issued by the client. For example, to retrieve the home page of a web site:

$ printf "GET / HTTP/1.0\r\n\r\n" | nc host.example.com 80

Note that this also displays the headers sent by the web server. They can be filtered, using a tool such as

if necessary.

More complicated examples can be built up when the user knows the format of requests required by the server. As another example, an email may be submitted to an SMTP server using:

$ nc [-C] localhost 25 EOF HELO host.example.com MAIL FROM:user@host.example.com RCPT TO:user2@host.example.com DATA Body of email. . QUIT EOF

It may be useful to know which ports are open and running services on a target machine. The

flag can be used to tell

to report open ports, rather than initiate a connection. Usually it's useful to turn on verbose output to stderr by use this option in conjunction with

option.

For example:

$ nc -zv host.example.com 20-30 Connection to host.example.com 22 port [tcp/ssh] succeeded! Connection to host.example.com 25 port [tcp/smtp] succeeded!

The port range was specified to limit the search to ports 20 - 30, and is scanned by increasing order (unless the

flag is set).

You can also specify a list of ports to scan, for example:

$ nc -zv host.example.com http 20 22-23 nc: connect to host.example.com 80 (tcp) failed: Connection refused nc: connect to host.example.com 20 (tcp) failed: Connection refused Connection to host.example.com port [tcp/ssh] succeeded! nc: connect to host.example.com 23 (tcp) failed: Connection refused

The ports are scanned by the order you given (unless the

flag is set).

Alternatively, it might be useful to know which server software is running, and which versions. This information is often contained within the greeting banners. In order to retrieve these, it is necessary to first make a connection, and then break the connection when the banner has been retrieved. This can be accomplished by specifying a small timeout with the

flag, or perhaps by issuing a

command to the server:

$ echo "QUIT" | nc host.example.com 20-30 SSH-1.99-OpenSSH_3.6.1p2 Protocol mismatch. 220 host.example.com IMS SMTP Receiver Version 0.84 Ready

Open a TCP connection to port 42 of host.example.com, using port 31337 as the source port, with a timeout of 5 seconds:

Open a UDP connection to port 53 of host.example.com:

Open a TCP connection to port 42 of host.example.com using 10.1.2.3 as the IP for the local end of the connection:

Create and listen on a

stream socket:

Connect to port 42 of host.example.com via an HTTP proxy at 10.2.3.4, port 8080. This example could also be used by

see the

directive in

for more information.

The same example again, this time enabling proxy authentication with username

if the proxy requires it:

Original implementation by

Rewritten with IPv6 support by

Modified for Debian port by Aron Xu

UDP port scans using the

combination of flags will always report success irrespective of the target machine's state. However, in conjunction with a traffic sniffer either on the target machine or an intermediary device, the

combination could be useful for communications diagnostics. Note that the amount of UDP traffic generated may be limited either due to hardware resources and/or configuration settings.